24/7 Heating Repair Service – Efficient and Always Available
When your heating system fails in the middle of a freezing night, you need fast, dependable support—and that’s exactly what we deliver. Our 24/7 heating repair service is designed for homeowners, landlords, and property managers who can’t afford delays.
Our Gas Safe-certified engineers are always on standby, ready to handle emergencies with precision and technical skill. From malfunctioning boiler control panels to broken thermocouples, Pearl Lemon Repairs got you covered. Using advanced diagnostics and industry-grade tools like combustion analysers, flue gas detectors, and thermal imaging cameras, we locate the problem fast and fix it on the first visit 90% of the time.
No excuses. No delays. Just dependable support from engineers who know heating systems inside and out.
Our 24/7 Heating Repair Services – We’re Ready When You Need Us Most
Your heating system works hard, especially during winter. When it fails, there’s no time to waste. We provide emergency support 24 hours a day, 7 days a week, to get your system running smoothly again. Unlike other services that rely on “next-day parts delivery,” we arrive with fully stocked service vans, so we can repair most problems on the spot.
Our engineers aren’t just handymen. They’re Gas Safe-registered specialists with deep technical knowledge of boilers, furnaces, heat pumps, and hybrid systems. We service all major heating brands, including Worcester Bosch, Vaillant, Ideal, and more.
Here’s what we can repair at any time of the day or night:
- Boiler breakdowns (control panels, sensors, diverter valves)
- Furnace failures (ignition switches, flame sensors, limit switches)
- Heat pump malfunctions (compressor failures, refrigerant issues)
- Heating system leaks (water leaks, refrigerant leaks)
- Pilot light and ignition failures
Emergency Boiler Repairs Service – Immediate Solution for Critical Breakdowns
A broken boiler in winter isn’t just inconvenient — it’s dangerous. Our Gas Safe engineers specialise in diagnosing and fixing critical boiler issues, even in the most challenging conditions. We identify and resolve problems using advanced tools like flue gas analysers to detect combustion inefficiencies and thermal imaging cameras to pinpoint heat loss areas.
Emergency Boiler Issues We Fix
- PCB (Printed Circuit Board) Failure – The PCB controls the entire boiler. Signs of failure include error codes, a blank display, or the boiler not firing at all. We use diagnostic meters to test for continuity and voltage fluctuations before replacing the PCB if necessary.
- Frozen Condensate Pipe – In freezing weather, condensate pipes can become blocked with ice. We apply thermal techniques to defrost it and ensure proper drainage.
- Diverter Valve Malfunctions – If your boiler isn’t providing hot water but heating works, the diverter valve is likely stuck. Our engineers clean and repair valves or replace them if necessary.
- Flame Sensor & Ignition Issues – No flame = no heat. We check for loose connections, clean the flame sensor, and replace faulty ignition electrodes.
- Overheating Due to Limescale Buildup (Kettling) – This happens when limescale builds up on the heat exchanger. We use power flushing to clear out debris and restore normal heating efficiency.
Furnace Repair Service – Restoring Heat, Restoring Comfort
When a furnace fails, it’s usually due to mechanical, electrical, or airflow issues. Our engineers specialise in detecting hidden problems using multimeters for voltage checks, acoustic sensors to locate mechanical faults, and combustion analysers to test fuel-to-air ratios.
Technical Furnace Issues We Handle
- Ignition Failure – If the furnace won’t light, it could be due to a faulty ignitor, damaged flame sensor, or a problem with the gas supply. We test for electrical continuity and gas flow pressure to pinpoint the root cause.
- Blower Motor Failure – If the furnace runs but doesn’t blow air, the blower motor may be seized. We test the capacitor, inspect motor bearings, and check the fan relay switch to identify and resolve the issue.
- Heat Exchanger Cracks – Cracked exchangers release dangerous carbon monoxide (CO). We use combustion analysers to detect CO levels and identify any cracks. If a crack is confirmed, a replacement is essential.
- Short Cycling – If the furnace turns on and off repeatedly, it may be caused by a clogged filter, overheating, or a failing limit switch. We inspect each of these areas to resolve the cycling issue.
- Pilot Light Goes Out – If the flame won’t stay lit, we check for dirty thermocouples, improper gas pressure, and faulty control boards.
Heat Pump Repair Service – From Frozen Coils to Compressor Failures
Heat pumps are more complex than traditional boilers or furnaces. Our engineers use specialised tools like subcooling/superheat meters to measure refrigerant levels and detect imbalances.
Key Heat Pump Issues We Fix
- Refrigerant Leaks – If your system is blowing cool air, the refrigerant may be low. We perform a leak detection dye test and recharge refrigerant to restore proper heating.
- Frozen Evaporator Coils – Ice on the coils signals poor airflow or a refrigerant issue. We check airflow, defrost the coils, and restore refrigerant charge.
- Compressor Failure – The compressor is the heart of the system. We check for electrical failure using a multimeter and test for thermal overload.
- Electrical Faults – If the heat pump won’t start, we check contactors, relays, and capacitors for electrical faults, replacing parts as needed.
- Faulty Reversing Valve – If your system won’t switch from heating to cooling, the reversing valve is likely stuck. We use solenoid coil testing to determine if a replacement is required.
Pilot Light & Ignition Issues Services– Reignite Your Heating System
A pilot light that won’t stay lit is a telltale sign of deeper system issues. We troubleshoot ignition problems using tools like gas pressure testers and continuity meters.
Key Causes of Pilot Light Issues
- Thermocouple Failure – This copper sensor detects flame heat and signals the gas valve to stay open. If the thermocouple is faulty, the pilot light goes out. We test for voltage and replace damaged units.
- Pilot Orifice Blockage – Debris can block the tiny orifice where gas is released. We clean the pilot assembly and remove obstructions.
- Gas Pressure Issues – Low pressure from the gas line can cause the flame to flicker or go out. We check the manifold pressure and adjust if necessary.
- Dirty Ignitor Electrodes – If the ignitor is covered in soot or carbon build-up, it can’t produce the spark to ignite the pilot. We clean or replace the ignitor to restore proper function.
- Control Valve Issues – A faulty gas control valve can prevent the pilot from staying lit. We test the valve for proper operation and replace it if it’s defective.
frequently asked questions
We use combustion analysers and gas leak detectors. These devices detect CO2 and flue gas imbalances, which signal a potential gas leak.
This is known as “kettling”, caused by limescale build-up on the heat exchanger. We use power flushing to clear blockages and improve water flow.
A thermocouple detects heat and shuts off the gas valve if the flame goes out. A flame sensor does the same but is more common in modern boilers.
Possible causes include low refrigerant, frozen coils, or dirty air filters. We check refrigerant levels and test for pressure imbalances.
Boilers last 10-15 years and furnaces last 15-20 years. If yours is older, frequent breakdowns might signal it’s time for a replacement.
Don’t Get Left in the Cold – Call Pearl Lemon Repairs Anytime
When your heating system fails, time is critical. Our Gas Safe-registered engineers are equipped with the tools, experience, and industry-grade components to get the job done on the first visit 90% of the time. Don’t let a minor issue turn into a costly repair — call now.
Contact us. We’d love to hear from you!
If you have any questions, please do get in touch with us! If you’d prefer to speak directly to a consultant, book a call!
